Place of Origin:
CHINA
Brand Name:
SWS
Model Number:
hydraulic
Contact Us
This page is going to clarify one of them : Hydraulic stage collar
Hydraulic collar advantage and features
1-It can only manufactured by SWS in domestic china as one unique tech.
2- It can be used in horizontal and highly deviated well bores and applications where opening of the stage collar after displacement of the first
stage cementing is required.
3-The opening pressure can be changed to allow opening of the tool through a wide range of pressures.
4-The opening free fall trip device is optionally available for use if the stage collar is opened mechanically
5- When premium thread are using DRK , we recommend to use a landing collar to receive the 1st stage latch down wiper plug.
Product Description
1) Introduction
Stage collar is a tool used to complete the cementing operation into two times.
The stage collar should be used with centralizers above and below and a cementing basket positioned below the ports.
2) How to work
The operation of the collar is simple and reliable. It features a double locking mechanism consisting of a snap lock and ball lock system to assure that the ports are permanently locked closed after cementing is completed. Internal parts are designed to lock to prevent rotation during drill out and are constructed of easily drillable materials.
3) Features
a. Opening pressure can be adjusted and it is not subjective to hole angle.
b. The pressure-relief design prevents fluid trapping and compression during the closing phase of the tool's operation.
c. The I.D of upper/lower sub is the same as that of casing, but smaller than that of closing sleeve, which can minimize chances of damages to the closing sleeve.
d. The inner seats are made of an easily drillable NBR rubber/aluminum material. Both the opening and closing seats lock against rotation for easy drill out.
|
1) How can I place order?
A: You can contact us by email about your order details, or place order on line.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T and Western Union are the most usual ways we are using.
3) What's the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25days if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
4)How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
5)How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.
Send your inquiry directly to us
